Our
Products
EVO 44 Magnum Ram
The 44 Magnum is ultra slick, due to its burnished and polished bore.
*Two 10-32 ports at the end so you can mount QEV's or choose were to mount the nipples. comes with 2x10-32 nipples and 1x10-32 port plug.
*New SS extreme high flow nipples, for increased gas transfer.
*Polished lightweight alloy piston with single o-ring to reduce friction.
*Custom bumpers with radial air grooves.
*Features a larger than stock ram-rod, which as well as being stronger, also lowers the closing force of the ram to reduce breaking brittle paint.
They are available in silver or gloss black only.
£44.95
EVO Hollo-Point 3-way
Available in black or silver annodised finish
This is the latest version in our acclaimed series of 3-ways, it features a polished stainless steel shaft , high precision timing ports, high performance long lasting lube, annular exhaust ports for quick ram action, our special plating process which leaves an extremely hard, very slick finish on the internal bore, as well as a beautiful finish on the exterior.
Out Of Stock
EVO Mini LPR
Cocking regulator with adjustable output, can be adjusted between 45-105 psi (approximately) features excellent flow and balance characteristics. Ultra simple design with all wearing parts replaceable from the front.
Available in silver or black
Out Of Stock
EVO "Equalizer" Roller Sear
This beautifully made sear is precision made on a CNC machine. It is then polished and individually hardened for maximum durability and slickness of operation. The engaging face of the sear is then polished to a higher degree by hand and the roller bearing is added to the face that engages the trigger plate, to reduce friction considerably.
£19.95
EVO Delrin Bolt (Autococker) + Pin Kit
Features massive transfer port volume, increased diffuser hole diameter and corrosion resistant plunger assembly. Manufactured from black delrin for the ultimate in light-weight (almost half the weight of our standard kits) to enhance the cycling rate, especially in electronic Autocockers. Comes complete with delrin pin. Available in Evolution, pre-Y2K and Y2K lengths.
Out Of Stock
EVO Supercharger Bolt
Supercharger diffuser bolt for Autocockers. Lightweight bolt with six angled ports for ultra accuracy, produces a low pressure, very gentle pop on the ball which makes ball "blow throughs" a thing of the past. Comes complete with a solid stainless retaining pin with no ball bearings to fall out. Mechanism for retaining the pin is contained in the bolt.
Available in pre-Y2K length only whilst stocks last.
£19.95
Only pre-2K
In Stock
EVO Rex Kit
Nelspot Spring Kit with ultra-light springing, special "worm drive" velocity adjuster allows velocity to be adjusted without removing cocking rod.
Out Of Stock
EVO Elemental Rear Guard
This features a polished stainless steel guard loop and an anodised aluminium adjustable mounting block.
Available in Black or Silver
£19.95
EVO Elemental Rear Guard
Raw & Unassembled
Very limited quantity of Raw & Unassembled Elemental Guards which will make it easier for you to anodise the colour of your choice.
£19.95
EVO Cocking Rod Assembly
Entire assembly including knob, rod and bumper. Supplied un-glued ready for final adjustment on fitting. (will work with evolution, y2K and lightweight cut-blocks for pre-2k models)
£10.95
EVO "Slider" Sear
This is basically the same as our world-renowned Equalizer ball-raced sear, but with a solid, non-ball-raced design. It still uses the same high-quality materials and features the rear ramp geometry that has made the Equalizer a legend. It is best used in a hinge frame, although could be used in a sliding frame for those on a budget.
£6.50
EVO EZlok Delrin Bolt Pin
This is the same as the steel pin, but made out of super-lightweight delrin for the ultimate performance, especially in electronic cockers.
£5.95
Low Pressure Hose
For all Autocockers, available in red, blue black and clear
£2.95
per
Foot
EvolutionX Wire Detent Kit
These are replacement wire detent kits for the Evolution Autocockers. The detent kits include the actual detent, washer, and screw that holds the detent to the Autococker.
£3.75
ALL prices are
shown inclusive of 20% Vat
For orders; please go to the Contact page for our E-mail and telephone numbers.
Payment
terms
Trade And Retail enquiries
welcome.
Payment Only Accepted By PayPal.
All items are subject to availability. Prices and Offers subject to change without notice.
Belsales Ltd -
Company Reg No: 3191603