|
|
|
Excluding
Vat |
Including Vat |
|
|
 |
EVO Upgrade Kit
All the major working parts you
need to upgrade your Autococker.
Kit contains; Delrin bolt kit,
Supercharger Valve Kit, Rex Kit , 44 Magnum Ram and Low pressure hosing.
Ram available in chrome or
black or silver
No longer
includes QEV's
|
£108.29 |
£129.95 |
|
|
 |
EVO 44 MAGNUM RAM
Now with new sleek design and Evo engraving
They are
available anodised in silver or gloss black.
(please note
this product is no longer available in chrome)
Support for
this product can be found HERE; Support page. |
£29.13 |
£34.95 |
|
|
 |
EVO Q.E.V (Quick Exhaust Valve)
SOLD OUT
These are normally used
in pairs, one on either port of the ram. Designed to speed up the ram and so
speed up the cycle time.
New swivel design to make
installation easy
A MUST for all Electro cocker users,
works great on E-blades and Race-guns.
Will also help to lower the cocking
pressure needed.
Available with 10~32"
threads. ( same as
the Evo 44 magnum ram )
Please note;
Only intended for use on Electronic Autocockers. We do not recommend these
for use on mechanical Cockers.
Support for this product can be found HERE;
Support page.
|
Available in blue, black and silver |
|
|
SOLD
OUT
(designed to be used in
pairs on Autocockers) |
SOLD
OUT
(designed to be used in
pairs on Autocockers) |
|
 |
EVO Hollo-Point 3-way
Available in black or silver annodised finish
This is the latest version in our acclaimed
series of 3-ways, it features a polished stainless steel shaft , high
precision timing ports, high performance long lasting lube, annular exhaust
ports for quick ram action, our special plating process which leaves an
extremely hard, very slick finish on the internal bore, as well as a
beautiful finish on the exterior.
(please
note this product is no longer available in chrome)
|
£22.46 |
£26.95 |
|
|
 |
EVO Mini LPR (low pressure regulator)
Cocking regulator with adjustable output, can be adjusted between 45-105 psi
(approximately) features excellent flow and balance characteristics. Ultra
simple design with all wearing parts replaceable from the front.
Available in silver or black
Support for this product can be
found HERE; Support page. |
£41.63 |
£49.95 |
|
|
 |
EVO
Twista, Black or Chrome
This is the same end-cap as
used on the Evolution LPR, it also fits the WGP Sledgehammer regulator used
on stock cockers and will give them a similar range of adjustment. |
£16.63 |
£19.95
|
|
|
 |
Low Pressure Hose:
For all Autocockers, available in red, blue, black and clear.
1 foot of hose.
|
£1.63 |
£1.95 |
|
|
 |
EVO "Twister" Knob
This is a replacement knob for the "twister" kit (see above) available in
Black or silver.
|
SOLD
OUT |
SOLD
OUT |
|
|
 |
EVO "Equalizer" Roller Sear
This beautifully
made sear is precision made on a CNC machine. It is then polished and
individually hardened for maximum durability and slickness of operation. The engaging face of the sear is then polished to a higher degree by hand
and the roller bearing is added to the face that engages the trigger plate
which reduces friction considerably.
|
New Lower Price!!
£12.46
Was £24.96!! |
New Lower Price!!
£14.95
Was £29.95!! |
|
|
 |
EVO "Slider" Sear
This is basically the same as our
world-renowned Equalizer ball-raced sear, but with a solid, non-ball-raced
design. It still uses the same high-quality materials and features the rear
ramp geometry that has made the Equalizer a legend. It is best used in a
hinge frame, although could be used in a sliding frame for those on a
budget. |
New Lower Price!!
£5.42
Was £8.29!! |
New Lower Price!!
£6.50
Was £9.95!! |
|
|
 |
EVO
Supercharger
Bolt.
Supercharger
diffuser bolt for Autocockers (known in some markets as the Evolution Bolt
for Autococker). Lightweight bolt with six angled ports for ultra accuracy,
produces a low pressure, very gentle pop on the ball which makes ball "blow
throughs" a thing of the past. Comes complete with a solid stainless
retaining pin with no ball bearings to fall out. Mechanism for retaining the
pin is contained in the bolt.
Available in
Evolution, pre-Y2K and Y2K lengths.
Comes with free stainless steel
bolt pin while stocks last
Support for this product can be found HERE;
Support page. |
£16.63 |
£19.95 |
|
|
 |
EVO
Delrin Bolt
(Autococker) + Pin Kit
Features
massive transfer port volume, increased diffuser hole diameter and corrosion
resistant plunger assembly. Manufactured from black delrin for the ultimate
in light-weight (almost half the weight of our standard kits) to enhance the
cycling rate, especially in electronic Autocockers. Comes complete with
delrin pin. Available in Evolution, pre-Y2K and Y2K lengths.
Support for
this product can be found HERE; Support page. |
£33.29 |
£39.95 |
|
|
 |
EVO
EZlok
Stainless Steel Bolt Pin
This latest version of the famous Evolution
bolt pin is the lightest ever, made of polished stainless steel, designed to
work with the Evolution and Supercharger series of bolts.
|
£4.96 |
£5.95 |
|
|
 |
EVO
EZlok Delrin Bolt Pin
This is the same as the steel pin, but made
out of super-lightweight delrin for the ultimate performance, especially in
electronic cockers.
|
£4.95 |
£5.95 |
|
|
 |
EVO
Rex Kit
Nelspot Spring
Kit with ultra-light springing, special "worm drive" velocity adjuster
allows velocity to be adjusted without removing cocking rod.
|
£29.13 |
£34.95 |
|
|
 |
EVO
Supercharger Valve
This is the
heart of an Evolution, our almost indestructible exhaust valve (used the
world over) matched to our very special valve guide, featuring a very
special internal construction which gives the maximum efficiency and
consistency possible in any conditions, available with a brass guide or
stainless steel.
Support for this product can be
found HERE; Support page. |
£12.46
|
£14.95
|
|
|
  |
EVO Warp Feed Adapter
For use on threaded feed cockers as above,
use in conjunction with power-feed adaptor (not supplied)
Available
in a range of colours.
|
£10.42 |
£12.50 |
|
|
 |
EVO Elemental Rear Guard
This
features a polished stainless steel guard loop and an anodised aluminium
adjustable mounting block.
Available
in Black or Silver |
£12.46 |
£14.95 |
|
|
 |
EVO Front Mount
compliment your front regulator with this stylish front mount, features
brass tipped timing rod guide screw, available to match your gun.
Colours shown are NOT the full
range, just examples. |
SOLD
OUT |
SOLD OUT |
|
|
 |
EVO
Gas-Thru' Foregrip Designed to
match your Evolution front regulator mount perfectly, available in deep
chrome plate or a range of colours.
Colours shown are NOT the full
range, just examples. |
£14.54-
chrome
£12.46 -anodised
|
£17.45-chrome
£14.95 -anodised
|
|
|
 |
EVO Trigger Shoe
Single trigger shoe machined from solid
aluminium billet, features our satin blasted anodising, fits most cockers.
Available
in a range of colours.
Colours shown are NOT the full
range, just examples. |
SOLD
OUT |
SOLD
OUT |
|
|
 |
EVO Cocking Rod Assembly
Entire assembly including knob, rod and
bumper. Supplied un-glued ready for final adjustment on fitting. (will work
with evolution, y2K and lightweight cut-blocks for pre-2k models) |
£9.13 |
£10.95 |
|
|
|
